![]() The problem could be that your browser cache is still trying to use the DNS info it knows to access sites, instead of loading the Wi-Fi login page. Sometimes you just need to try loading a new page Now re-connect to the Wi-Fi network, and it should work. Mac: Open Terminal, and enter sudo killall -HUP mDNSResponder Windows: Open Command Prompt, and enter ipconfig /flushdns If not, you might need to clear the DNS cache on your computer. With that done, turn off your Wi-Fi then turn it back on-and the login screen should open. Select Configure DNS and tap Automatic.Īndroid: Open Settings, tap Advanced, then tap Private DNS. ![]() IOS: Open Settings, tap Wi-Fi, and tap the i button beside your network name. There select Option an IP address automatically to use the default DNS servers. Click your connection name (typically Wi-Fi), select Properties, then click Internet Protocol Version 4 and select Properties again. Windows: Right-click your network icon in the system tray and select Open Internet and Network Settings, then click Network and Sharing Center. Select any DNS servers listed, and then tap the - button to remove them and apply your changes. Mac: Open System Preferences, select Network, Advanced, and then click the DNS tab. To fix that, just open your DNS settings and remove any alternate DNS servers. Many public Wi-Fi networks use their DNS server to tell your computer which login page to open-which doesn't work when you're using an alternative DNS server. If you've ever added Google DNS, OpenDNS, or any other alternative DNS to your network settings, though, that may be your problem. And that's good, at least with public Wi-Fi: your login page is more likely to load, and you won't need these tips. If you don't know where to change your DNS settings, you're likely fine your computer by default automatically picks up a DNS server from the Wi-Fi router, which is what the public Wi-Fi expects you to use automatically. If there's one other tip to remember, it's this-the trick that usually gets login pages to load: turn off your alternate DNS server.ĭNS servers, or domain name servers, match domain names such as to its server's IP address-which makes it much easier to visit websites than typing in 52.0.36.104. To perform a hard reset, hold the reset button for 10 seconds, then set up the base station once again.You might speed up your internet with a different DNS server-but not when connecting to public Wi-Fi. Try this after all other troubleshooting tips have failed. Try a hard reset: This erases all data from the AirPort Express and lets you set it up from scratch with the AirPort Utility.This resets the base station password so you can set it up again using the AirPort Utility. Hold the button for about a second until the light flashes amber. This may require a paper clip or other item with a small point. Reset the AirPort Express: You can do this by pressing the reset button on the bottom of the device.When the light turns green, it has restarted and connected to the Wi-Fi network. Unplug the AirPort Express and plug it back in: Wait for it to restart.Check for updates: Make sure you have the most recent version of iTunes installed.Restart iTunes: If your computer and the AirPort Express are on the same network, try quitting iTunes and restarting it.Check the network: Make sure your computer is on the same Wi-Fi network as the AirPort Express.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |